56
5 SCAN WIDTH
You can set the frequency range for scanning in VFO mode and Memory mode.
1. Press and hold the [
F
MENU
] key
touch [
SCAN
]
[
5 SCAN WIDTH
]
2. Rotate the DIAL knob to select [
VFO
], then press the [
F
MENU
] key.
3. Rotate the DIAL knob to select the desired setting referring to the table below.
ALL
Scans all bands from the current frequency within the 1.8 MHz to 999
MHz range.
BAND
Starting with the current frequency, scans within the current band.
Remark
The default setting: ALL
4. Press the [
BACK
] key.
5. Rotate the DIAL knob to select [
MEMORY
], then press the [
F
MENU
] key.
6. Rotate the DIAL knob to select the desired setting referring to the table below.
ALL CH Scans all memory channels (1 to 900) starting with the currently specified
memory channel. When “Selected memory channel” is selected, all
specified memory channels are scanned.
BAND
Scans only the memory channels to which the frequencies are registered,
within the same frequency band
*1
as the currently specified memory
channel.
When the memory channels are registered as the specified memory
channels, scans only the specified memory channels to which the
frequencies are registered, within the same frequency band.
*1
Remark
The default setting: ALL CH
*1: For the relationship between frequency bands and receive frequencies, see
“
Selecting a Frequency Band
”” in the Operating Manual.
7. Press the [
BACK
] key.
8. Rotate the DIAL knob to select [
BANK LINK
], then press the [
F
MENU
] key.
9. Rotate the DIAL knob to select the desired setting.
ON
During memory bank link scanning, memory channels registered in two or
more previously specified banks can be scanned.
OFF
Only the memory channels assigned to the recalled memory bank are
scanned.
Remark
The default setting: ON
