58
2 BCLO
Preventing transmissions when the receive channel is busy.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
2 BCLO
]
2. Rotate the DIAL knob to select the desired setting.
OFF
Permits starting a transmission while receiving a signal.
ON
Disables transmissions while receiving a signal.
Remark
The default setting: OFF
3 BEEP
Set whether or not a beep sound is emitted to confirm when keys are operated, when
scanning reaches the end of a frequency band, or when a band edge/CH1 is encountered.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
3 BEEP
]
2. Rotate the DIAL knob to select [
SELECT
], then press the [
F
MENU
] key.
3. Rotate the DIAL knob to select the desired setting referring to the table below.
KEY & SCAN Emits the beep sound when a key is operated or scanning stops.
KEY
Emits the beep sound when a key is pressed.
OFF
Mutes the beep sound.
Remark
The default setting: KEY & SCAN
4. Press the [
BACK
] key.
5. Rotate the DIAL knob to select [
EDGE
], then press the [
F
MENU
] key.
6. Rotate the DIAL knob to select the desired setting referring to the table below.
OFF
No confirmation sound is emitted when a band edge/CH1 is encountered.
ON
Emits the confirmation sound when a band edge/CH1 is encountered.
Remark
The default setting: OFF
4 BEEP LEVEL
Set the volume of the beep sound.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
4 BEEP LEVEL
]
2. Rotate the DIAL knob to select the desired setting.
HIGH
Volume level set to HIGH
LOW
Volume level set to LOW
Remark
The default setting: LOW
