52
Speed: Unit can be set to [km] or [mile].
Altitude: Unit can be set to [m] or [feet].
Temp:
Units can be set to [°C] or [°F].
Rain:
Unit can be set to [mm] or [inch].
Wind:
Unit can be set to [m/s] or [mph].
y
12 APRS TXDELAY
Set the data sending delay time.
Setting item:
100ms / 150ms / 200ms / 250ms / 300ms / 400ms / 500ms / 750ms / 1000ms
Default:
300ms
Explanation:
The preamble (data transmission delay time), shown right, for when
transmitting APRS data can be
set.
y
13 BEACON INFO
Setting the transmit beacon information
Setting item:
AMBIGUITY: OFF / 1digi / 2digi / 3digi / 4digi
SPD/CSE: ON / OFF
ALTITUDE: ON / OFF
Default:
AMBIGUITY: OFF
SPD/CSE: ON
ALTITUDE: ON
Explanation:
AMBIGUITY:
This function is for masking lower denominations of your position
(longitude, latitude) to disambiguate the position of your station.
Setting this function to [OFF] disables disambiguation and transmits
the precise position information of your station.
OFF
1digit
2digit
3digit
4digit
35°38.17’
35°38.1
35°38.
35°3
.
35°
.
139°42.33’
139°42.3
139°42.
139°4
.
139°
.
SPD/CSE:
(SPEED/COURSE)
If function is set to [ON], speed and directional information is
transmitted. If this function is set to [OFF], speed and directional
information is not be transmitted.
ALTITUDE:
If this function is set to [ON], altitude information is transmitted.
If this function is set to [OFF], altitude information is not transmitted.
Start Transmission
APRS beacon transmission content
APRS Data
Preamble
(data transmission delay time)
(Default: 300ms)
End Transmission
Hours
