51
WEATHER: Setting for the sound of the bell that rings when a weather beacon is
received.
OBJECT:
Setting for the sound of the bell that rings when a object beacon is received.
ITEM:
Setting for the sound of the bell that rings when an item beacon is received.
STATUS:
Setting for the sound of the bell that rings when a status beacon is received.
OTHER:
Setting for the sound of the bell that rings when a beacon other than what
is used by APRS is received.
MY PACKET: Setting for the sound of the bell that rings when a when a self transmitted
beacon (relay wave) is received.
MSG:
Setting for the sound of the bell that rings when a new message is received.
GRP:
Setting for the sound of the bell that rings when a group message is
received.
BLN:
Setting for the sound of the bell that rings when a bulletin message is
received.
MY MSG:
Setting for the sound of the bell that rings when a self transmitted message
(relay wave) is received.
DUP BCN: Setting for the sound of the bell that rings when a overlapping beacon is
received.
DUP MSG: Setting for the sound of the bell that rings when a message that has already
has been received is received again.
ACK REJ:
Setting for the sound of the bell that rings when response data (ACK, REJ)
of a message sent by your station is received.
OTHER MSG: Setting for the sound of the bell that rings when a message addressed to
another destination is received.
TX BCN:
Setting for the sound of the bell that rings when a beacon is being sent
from your station.
TX MSG:
Setting for the sound of the bell that rings when a message is being sent
from your station.
y
11 APRS UNIT
Unit setting for APRS display.
Setting item:
Position: MM.MM' / MM'SS"
Distance: km / mile
Speed: km/h / knot / mph
Altitude: m / ft
Temp:
°C / °F
Rain:
mm / inch
Wind:
m/s / mph
Default:
Depends on the transceiver version.
Explanation:
Set the measurement unit for Latitude/Longitude (Position), Distance, Speed, Altitude,
Temperature (Temp), Precipitation (Rain), and Wind Speed (Wind).
Position: Unit display of minute of Longitude/Latitude (DD° MM.MM’) can be changed.
MM’ is displayed in 1/100 minute and SS” in seconds.
Distance: Unit can be set to [km] or [mile].
