53
y
14 BEACON INTERVAL
Automatic transmit interval settings for beacon
Setting item:
30 sec / 1 min / 2 min / 3 min / 5 min / 10 min / 15 min / 20 min / 30 min /
60 min
Default:
5 minutes
Explanation:
Set the automatic transmit interval for transmission of APRS beacons.
• Set the Set mode option [
APRS
] → [
16 BEACON TX
] to [AUTO]. The timer for
transmission is reset when the automatic transmit interval is set.
From this point, the count for interval time begins, and the initial beacon is automatically
transmitted when the specified time is reached.
• If squelch is active when the interval for automatic beacon transmission is reached, the
transmission is stopped.
The beacon is transmitted when squelch is deactivated.
• If SMART is selected in [
APRS
] → [
16 BEACON TX
], the setting for BEACON INTERVAL
is ignored.
y
15 BEACON STATUS TXT
Entering status text
Setting Item:
S.TXT:
ON / OFF
TX RATE: 1/1 1/2 1/3 1/4 1/5 1/6 1/7 1/8
TEXT1: (Not entered)
TEXT2: (Not entered)
TEXT3: (Not entered)
TEXT4: (Not entered)
TEXT5: (Not entered)
* Up to 60 characters can be entered for status text into TEXT1 to TEXT5.
Default:
S.TXT: OFF
TX RATE: 1/1
TEXT1: Text not entered.
Explanation:
S.TXT:
Select the status text to send when transmitting a beacon.
Selecting OFF transmits the beacon without a status text.
TX RATE: Set how frequent a status text is sent with a APRS beacon. Select from 1/1:
every time, 1/2: 2 once every 2 transmissions, to up to 1/8: once every 8
transmissions, a status text is sent with a beacon.
