59
3
Touch [
APRS
].
4
Turn the DIAL knob to select [
24 MY POSITION
] and touch it on the display.
5
Turn the DIAL knob to select the memory to register.
Select a memory channel from P1 to P10, to register the position information.
6
Press the [
F
MENU
] key.
7
Touch [
P.WRITE
]
.
The position information is registered to the selected
memory channel.
In standard operation of APRS, the position of your station is automatically
acquired via GPS.
Other than when a GPS antenna unit is connected to your station, be sure to
have the setting as “GPS”.
y
25 MY SYMBOL
Symbol setting for your station
Setting Item:
Symbol
Default:
1: Human/Person (
)
2: Bicycle (
)
3: Car (
)
4: Yaesu Radios (
)
Explanation:
Set the symbol for your station to transmit.
Select your symbol from 48 types.
y
26 POSITION COMMENT
Set up the position comment function.
Setting Item:
Off Duty / En Route / In Service / Returning / Committed / Special / Priority/
Custom 0 / Custom 1 / Custom 2 / Custom 3 / Custom 4 / Custom 5 /
Custom 6 / Emergency!
Default:
Off Duty
Explanation:
Select the position comment (standard message) incorporated into
beacons of your station.
Unless there is a serious emergency, such as an accident or natural disaster,
do not select
[
EMERGENCY!
]
.
y
27 SmartBeaconing
Settings for SmartBeaconing
Setting Item:
STATUS:
OFF / TYPE1 / TYPE2 / TYPE3
LOW SPD: 2 to 30
HIGH SPD: 6 to 90
SLOW RATE: 1min to 100min
FAST RATE: 10sec to 180sec
TURN ANGL: 5° to 90°
TURN SLOP: 1 to 255
TURN TIME: 5sec to 180sec
