24
FTM-400XD/D
On the frequency setting screen, you can set and operate the following with the transceivers key and DIAL knob settings.
Function
Key or Dial
Switches between the Access Point and the Direct Operation
Press the B-Band
DIAL
knob (Lower)
Starts operation for the Portable Digital Node
Press the
D X
key or press the
P3
key on the
microphone (by default setting)
Sets the operation frequency
Rotate the
DIAL
knob or press the numeric
keypad input screen
Switches between the VFO mode and the Memory Channel mode Touch [
V/M
] on the LCD screen
Sets the transmit and receive DG-ID number
Press and hold the
GM
key
Displays the Function Menu Screen
Press the
F(MW)
key
Selects the Transmission Power Level
Touch [
TX PWR
] in the Function Menu Screen
or press the
P4
key on the microphone (by de-
fault setting)
Enters the Set mode*
Press and hold the
DISP
key
Enters the BACKTRACK (COMPASS) screen
Press the
DISP
key
Registering to Memory Channel
Press and hold the
F(MW)
key
Recalls the “HOME” channel
Touch [
HOME
] in the Function Menu Screen or press
the
P2
key on the microphone (by default setting)
Squelch OFF
Press the
P1
key on the microphone (by default setting)
Adjusts the squelch level
Touch [
SQL
] on the LCD screen, then rotate the
A-Band
DIAL
knob (Upper)
Reverses the transmit and receive frequencies
Touch [
REV
] in the Function Menu Screen
Switches Busy detection between “Noise squelch” and “DG-ID number match”. Press and hold the B-Band
DIAL
knob (Lower)
*
Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.
FTM-300D
or
FTM-200D
On the frequency setting screen, you can set and operate the following with the transceivers key and DIAL knob settings.
Function
Key or Dial
Switches between the Access Point and the Direct Operation
Press the
A/B
key
Starts operation for the Portable Digital Node
Press the
D X
key or press the P3 key on the
microphone (by default setting)
Sets the operation frequency
Rotate the
DIAL
knob or ten key on the microphone
Selects the operating band
Press the
BAND
key
Recalls the “HOME” channel
Press the
P2
key on the microphone (by default setting)
Switches between the VFO mode and the Memory Channel mode Press the
V/M (MW)
key
Registering to Memory Channel
Press and hold the
V/M (MW)
key
Displays the Function Menu Screen (FTM-300D)
Displays the Function List Screen (FTM-200D)
Press the
F
SETUP
key (FTM-300D),
Press the
F
MENU
key (FTM-200D)
Sets the transmit and receive DG-ID number
Press and hold the
GM
key
Selects the Transmission Power Level
Function Menu
[
FUNCTION
]
[
TXPWR
] (FTM-300D),
Function List
[
TXPWR
] (FTM-200D), or press
the
P4
key on the microphone (by default setting)
Enters the Setup menu*
Press and hold the
F
SETUP
key (FTM-300D),
Press and hold the
F
MENU
key (FTM-200D)
Enters the BACKTRACK (COMPASS) screen
Press the
DISP
key
Squelch OFF
Press and the
P2
key ~
P4
key on the microphone*
*Setting of "SQL OFF" function is necessary for P2 ~
P4 keys in set mode.
Adjusts the squelch level
Press the
SQL
key, then rotate the A-Band
DIAL
knob (FTM-300D) or the
DIAL
knob (FTM-200D)
Reverses the transmit and receive frequencies
Press and the
P2
key ~
P4
key on the microphone*
*Setting of "REVERSE" function is necessary for P2 ~
P4 keys in set mode.
Switches Busy detection between “Noise squelch” and “DG-ID number match”. Press and hold the
A/B
key
*
Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.
