23
FT3D or FT2D
On the frequency setting screen, you can set and operate the following with the transceivers key and DIAL knob settings.
Function
Key or Dial
Switches between the Access Point and the Direct Operation
Press the
A/B
key
Starts operation for the Portable Digital Node
Press the
X
key
Sets the operation frequency
Rotate the
DIAL
knob or press the Numeric
keypad input screen
Switches between the VFO mode and the Memory Channel mode Press the
V/M
key
Moves operation to the next-highest frequency band
Press the
BAND
key
Sets the transmit and receive DG-ID number
Press and hold the
GM
key
Displays the Function Menu Screen
Touch [
F MW
]
Selects the Transmission Power Level
Touch [
TXPWR
] on the Function Menu Screen
TX/BUSY LED turn OFF/ON
V/M
key (Press and hold)
Enters the Set mode*
Press and hold the
DISP
key
Enters the BACKTRACK screen
Press the
DISP
key
Registering to Memory Channel
Touch and hold [
F MW
]
Recalls the “HOME” channel
Touch [
HOME
] on the Function Menu Screen
Squelch OFF
While
MONI
key is pressed
Adjusts the squelch level
Press the
SQL
key, then rotate the
VOL
knob
(FT3D) or the
DIAL
knob (FT2D)
Reverses the transmit and receive frequencies
Touch [
REV
] on the Function Menu Screen
Switches Busy detection between “Noise squelch” and “DG-ID
number match”.
Press and hold the
A/B
key
*
Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.
FTM-500D
On the frequency setting screen, you can set and operate the following with the transceivers key and DIAL knob settings.
Function
Key or Dial
Switches between the Access Point and the Direct Operation
Press the
key
Starts operation for the Portable Digital Node
Press the
D X
key or press the P3 key on the
microphone (by default setting)
Sets the operation frequency
Rotate the
DIAL
knob or ten key on the microphone
Selects the operating band
Press the
BAND
key
Recalls the “HOME” channel
Press the
P2
key on the microphone (by default setting)
Switches between the VFO mode and the Memory Channel mode Press the
V/M (MW)
key
Registering to Memory Channel
Press and hold the
V/M (MW)
key
Displays the Function List Screen
Press the
FUNC
knob
Sets the transmit and receive DG-ID number
Press and hold the
GM
key
Selects the Transmission Power Level
Function List
[
TXPWR
] or press the
P1
key ~
P4
key on the microphone*
*Setting of "TX POWER" function is necessary for P1
~ P4 keys in set mode.
Enters the Setup menu*
Press and hold the
FUNC
knob
Enters the BACKTRACK (COMPASS) screen
Press the
DISP
key
Squelch OFF
Press and the
P1
key ~
P4
key on the microphone*
*Setting of "SQL OFF" function is necessary for P1 ~
P4 keys in set mode.
Adjusts the squelch level
Press the MAIN Band
VOL/SQL
knob, then
rotate the MAIN Band
VOL/SQL
knob
Reverses the transmit and receive frequencies
Press the
P1
key ~
P4
key on the microphone*
*Setting of "REVERSE" function is necessary for P1 ~
P4 keys in set mode.
Switches Busy detection between “Noise squelch” and “DG-ID
number match”.
Press and hold the
key
*
Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.
