73
FT-7800R O
PERATING
M
ANUAL
Menu #35
[
RX MOD
]
Function
: Selects the Receiving mode.
Available Values
: AUTO/FM/AM
Default
: AUTO (Mode automatically changes according to operating frequency.)
Menu #36
[
S SRCH
]
Function
: Selects the Smart Search Sweep mode.
Available Values
: SINGLE/CONT
Default
: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting on the
current frequency. All channels where activity is present (up to 15 in each direc-
tion) are loaded into the Smart Search memories. Whether or not all 31 memories
are filled, the search stops after one sweep in each direction.
CONT:
The transceiver makes a sweep in each direction as with the “Single” mode, but if
all 31 channels are not filled after the first sweep, the radio continues sweeping
until they are all filled.
Menu #37
[
SCAN
]
Function
: Selects the Scan-Resume mode.
Available Values
: TIME/BUSY/HOLD
Default
: BUSY
BUSY: The scanner will halt on a signal it encounters. Two seconds after the carrier has
dropped because the other station(s) ceased transmission, the scanner will resume.
TIME: The scanner will halt on a signal it encounters, and will hold five seconds. If you do
not take action to disable the scanner within five seconds, the scanner will resume
even if the stations are still active.
HOLD: The scanner will stop when a signal is received, and will not restart.
Menu #38
[
SCN MD
]
Function
: Selects the Memory Scan channel-selection mode.
Available Values
: MEM/ONLY
Default
: MEM
MEM: The scanner will “skip” the flagged channels during scanning.
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
Menu #39
[
SHIFT
]
Function
: Sets the magnitude of the Repeater Shift.
Available Values
: 0.00 - 99.95 MHz (50 kHz step)
Default
: Depends on the band of operation.
M
ENU
(
“S
ET
”
)
M
ODE
