Yaesu FT-7800R, Operating Manual

Page: 33 / 80

31 FT-7800R O
PERATING
M
ANUAL
CTCSS/DCS O
PERATION
S
PLIT
T
ONE
O
PERATION
The FT-7800R can be operated in a Split Tone configuration via the Set mode.
1. Press and hold in the [ BAND
(
SET
)] key for 1/2 second to enter the Set mode.
2. Rotate the
DIAL
knob to select Menu #41 ( SPLIT ).
3. Press the [ BAND
(
SET
)] key momentarily, then rotate
the
DIAL
knob to select “ ON ” (to enable the Split Tone
feature).
4. Press the [
BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
When the Split Tone feature is activated, you can see the following additional parameters
after the “
DCS
” parameter while selecting the Tone Mode by pressing the [ TONE
(
REV
)]
key:
D : DCS Encode only
(the “
DCS ” icon will blink during operation)
ENC DCS : Encodes a CTCSS Tone and Decodes a DCS code
(the “ DCS ” and “ ENC ” icons will appear during operation)
D-DEC : Encodes a DCS code and Decodes a CTCSS Tone
(the “
DCS ” icon will blink and the “ DEC ” icon will appear during opera-
tion)
Select the desired operating mode, from the selections shown above.