66
FT-7800R O
PERATING
M
ANUAL
Item
#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Menu Item
APO
AR BEP
AR INT
ARS
BEEP
CLK.SFT
CWID
CW WRT
DCS.COD
DCS.N/R
DIMMER
DT DLY
DT SPD
DT WRT
EDG.BEP
HM/REV
HYPER
I NET
INT CD
INT MR
LOCK
MIC
NAME
NM WRT
PKT.MIC
PKT.SPD
PRG.PNL
PRG P1(ACC)
PRG P2(P)
PRG P3(P1)
PRG P4(P2)
RF SQL
RPT.MOD
PRI.RVT
RX MOD
S SRCH
SCAN
SCN MD
SHIFT
SKIP
SPLIT
SQL.TYP
STEP
TN FRQ
TOT
VFO.BND
WID.NAR
WX ALT
Function
Selects the Automatic Power Off time (time before power goes off).
Selects the ARTS beep mode.
Selects the Polling Interval during ARTS operation.
Activates/deactivates the Automatic Repeater Shift feature.
Enables/disables the beeper.
Shifting of CPU clock frequency.
Enables/disables the CW identifier during ARTS operation.
Stores your callsign into the CW identifier.
Setting the DCS code.
Selects “Normal” or “Inverted” DCS coding.
Setting of the Display brightness level.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Loading of the DTMF Autodialer Memories.
Enables/Disables the Band-edge beeper while selecting the frequency
by the DIAL knob.
Selects the alternate function of the [
TONE
(
HM/RV
)] key and pri-
mary function of the [
V/M
(
MW
)] key.
Enables/disables the Automatic Writing feature for the Hyper Memory.
Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WIRESTM operation.
Selects the Access Number (DTMF code) for non-WIRES
TM
Internet
Link System access.
Selects the Control Locking lockout combination.
Selects the microphone type to be used.
Toggle the display indication of the Memory/Home channel between
“frequency” and the channel’s “Alpha-numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory/Home channels.
Enables/disables the microphone input during Packet operation.
Sets the transceiver’s circuitry for the Packet baud rate to be used.
Programming the alternate (press and hold in) function of the front
panel’s [
LOW
(
ACC
)] key.
Programming the microphone’s [
P1
]/[
ACC
] button assignment.
Programming the microphone’s [
P2
]/[
P
] button assignment.
Programming the microphone’s [
P3
]/[
P1
] button assignment.
Programming the microphone’s [
P4
]/[
P2
] button assignment.
Adjust the RF SQL threshold level.
Sets the Repeater Shift Direction.
Enables/Disables the Priority Revert feature.
Selects the Receiving mode.
Selects the Smart Search Sweep mode.
Selects the Scan-Resume mode.
Selects the Memory Scan channel-selection mode.
Sets the magnitude of the Repeater Shift.
Selects what action will happen on a “flagged” Memory Channel.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Sets the Synthesizer steps.
Sets the CTCSS Tone Frequency.
Sets the Time-Out Timer.
Selects or disables the VFO band edge limiting for the current band.
Reducing the MIC Gain (and Deviation).
Enables/disables the Weather Alert Scan.
Available Values
(
Default:
Bold Itaric
)
OFF
/0.5 H ~ 12.0 H
INRANG
/ALWAYS/OFF
25sec
/15sec
ARS.ON/ARS.OFF (
)
KEY/
KEY+SC
/OFF
SFT.ON/
SFT.OFF
TX ON/
TX OFF
---
104 DCS codes (
023
)
TRX N
/RX R/TX R/TRX R
DIM 1
/DIM 2/DIM 3/DIM.OFF
50MS/100MS/250MS/
450MS
/750MS/1000MS
50MS
/75MS/100MS
---
BEP.ON/
BEP.OFF
REV
/HOME
MANUAL/
1-AUTO
/AUTO
INT.COD
/INT.MEM
CODE 0 ~ 9/A/B/C/D/E/F
(
CODE 1
)
d- 1
~ d16
LK KEY/LK DIAL/LK K+D/
LK PTT/LK P+K/LK P+D/
LK ALL/
LK OFF
MH-48
/MH-42
FREQ
/ALPHA
---
MIC.ON/
MIC.OFF
1200bps
/9600bps
WX
/REV/RPTR/
SQ.OF/LOCK/DIM
SQ.OF/TCAL/SSCH/ARTS/WX/
TN.FQ/DCSC/RPTR/PRI/
LOW
(#31)/
TONE
(#30)/MHz/REV/
HOME/
BAND
(#28)/
V/M
(#29)/SCAN
OFF
/S-2 ~ 9/S-FULL
RPT.OFF
/RPT.--/RPT.+ (
)
RVT.ON/
RVT.OFF
AUTO
/FM/AM
SINGLE
/CONT
TIME/
BUSY
/HOLD
MEM
/ONLY
0.00 ~ 99.95 MHz (
)
OFF
/SKIP/ONLY
SPL.OFF
/SPL.ON
OFF
/ENC/ENCDEC/
REV TN/DCS
AUTO
/5.0 k/10.0 k/12.5 k/
15.0 k/20.0 k/25.0 k/
50.0 k/100 k
50 CTCSS Tones (
100 Hz
)
1 ~ 30 minutes or OFF
(
6 minutes
)
BND.ON
/BND.OFF
WIDE
/NARROW
ALT.ON/
ALT.OFF
M
ENU
(
“S
ET
”
)
M
ODE
: Depends on the band of operation.
