27
FT-7800R O
PERATING
M
ANUAL
M
ANUAL
R
EPEATER
S
HIFT
A
CTIVATION
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press and hold in the [
BAND
(
SET
)] key for 1/2 second to enter the Set mode.
2. Rotate the
DIAL
knob to select Menu #33 (
RPT.MOD
).
3. Press the [
BAND
(
SET
)] key momentarily, then rotate the
DIAL
knob to select the de-
sired shift among “
RPT.–
,” “
RPT.+
,” and “
RPT.OFF
.”
4. Press the [
BAND
(
SET
)] key momentarily to save the new setting, then press and hold in
the [
BAND
(
SET
)] key for 1/2 second to exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press and hold in the [
BAND
(
SET
)] key for 1/2 second to enter the Set mode.
2. Rotate the
DIAL
knob to select Menu #39 (
SHIFT
).
3. Press the [
BAND
(
SET
)] key momentarily, then rotate the
DIAL
knob to select the new
repeater shift magnitude. The shift must be a multiple of 50 kHz.
4. Press the [
BAND
(
SET
)] key momentarily to save the new setting, then press and hold in
the [
BAND
(
SET
)] key for 1/2 second to exit to normal operation.
If you just have one “odd” split that you need to program, don’t change the “de-
fault” repeated shifts using this Menu Item! Enter the transmit and receive fre-
quencies separately, as shown on page 33.
R
EPEATER
O
PERATION
