The (lower)
LAMP
button illuminates the display
when operating in the dark.
This 4-mm coaxial jack accepts 5-13 VDC at 2A,
via the E-DC-5B cable, to power the transceiver from
an external supply. We recommend using this jack
only with the optional cable.
This Q-conductor, 3.5-mm mini phone jack pro-
vides 8-R audio output and accepts microphone in-
put
for using an optional earphone,
speaker/mic or packet tnc. The internal loudspeaker
and microphone are disabled when this jack is used.
Rear (battery pack installed)
Press this button to release the battery for re-
moval.
Install the latch-on belt clip here.
Note: the protective rubber covers over the EXT DC
and Mic/Ear jacks must be pressed over them when
not in use, to protect the inside of the transceiver
from dust and water.
