Advanced Operation
Dual Watch
Dual watch receives on the main channel while
checking for stations on the sub channel. If activity is
detected, operation shifts there while the signal is
present. There are four dual watch choices, as out-
lined below in the table:
Mode
Dual Watch Operation
Main Channel
Sub Channel
for operation.
any stored memory
any stored memory
HOME channel
any
memory
VFO
VFO
VFO
Before using dual watch, ensure that the sub
channel display is enabled (set
to
and the squelch is closed (use
I-
V/M Dual Watch
To set up
dual watch:
Press
and select any stored memory for dual
watch to check.
Press
as necessary to select either VFO A or
B for the main channel.
From the VFO, press
to activate dual
watch.
M/M Dual Watch
To set up
dual watch:
Store a frequency that you want dual watch to
check
in memory .
Press
and
select another stored memory
(other than
I-) for main channel operation.
With the memory displayed, press
to
activate Dual Watch.
H/M Dual Watch
To set up H/M dual watch:
Select any stored memory for main channel opera-
tion.
Press
to recall the HOME memory
appears at the display top).
With the HOME memory displayed, press
to activate dual watch.
V/V Dual Watch
Press
as needed to select VFO A and B for the
main and sub channel, as desired.
Press
and
ho/d
for second.
For all dual watch modes,
at the bottom
left of the display. During
V/M
and
dual
watch, the sub channel memory is checked every
five seconds for activity (you will see the main and
