![background image](http://html1.mh-extra.com/html/yachting-electronic-co/naki8850b/naki8850b_user-manual_3083767026.webp)
the hull.
5) Press the transducer into the epoxy of the sanding area
on the hull with a slight twisting motion, forcing any air
bubbles out from underneath. Make sure the face of the
transducer will be parallel with the hull after you finish
all the above job.
Warning:
Warning: do not bump the transducer while the epoxy is
wet. It will take about 24hous for the epoxy curing
completely.
Note:
Note: weight the transducer with some heavy object to
prevent it from moving during the epoxy curing. When
the epoxy cures completely, drain out the remained
water from the hull.
6) Route the cable to the control head, and now it’s ready
to use.
Summary of Contents for NAKI8850B
Page 2: ......
Page 6: ...Specfications and Feature 49 Specfications 49 Features 50 Contact us 51 iv...
Page 58: ......
Page 59: ...www goyachting cn...