enwinding the transducer cable with other electrical wires
or some electrical device that may cause interference, as
this will affect the transducer’s transmission / reception
of sonar signal.
5. Test th
5. Test the initial in
e initial installation
stallation
To get a better installation of the transducer, we suggest you
testing the initial installation and adjust the transducer
according to the test outcome.
Before the test, please make certain you have finished the
installation of the sonar unit and properly connect the
transducer cable to the sonar unit. Also make sure the distance
between the transducer and bottom is not beyond the depth
capability of your Fishfinder.
1) Power up the sonar unit and see whether there is sonar
information on display. If yes, it means the sonar unit is
properly connected to the transducer. If not
ˈ
please
check the connection between the sonar unit and the
transducer.
2) First
ˈ
run your boat at a low speed. See the sonar
Summary of Contents for NAKI8850B
Page 2: ......
Page 6: ...Specfications and Feature 49 Specfications 49 Features 50 Contact us 51 iv...
Page 58: ......
Page 59: ...www goyachting cn...