![background image](http://html1.mh-extra.com/html/yachting-electronic-co/naki8850b/naki8850b_user-manual_3083767022.webp)
Shoot-thru-hull installation (for T810 transducer)
Shoot-thru-hull installation (for T810 transducer)
Transom installation is the most widely used method to
install the transducer. However in some situation you also
could use Shoot-thru-hull transducer installation. Which,
compared with Transom installation, is more convenient
and fast. However, considering of the material of boat and
any possible trapped air bubbles in the material, sonar
signals will be slightly reduced when passing through the
boat hull.
1. P
1. Preparati
reparation
on
The boat hull should be single layer construction, since the
sonar signal could not pass through air.
Note:
Note: The areas being chosen to mount the transducer
should be free from turbulent water. Any ribs
ǃ
strakes
and other protrusions that may create turbulence should
be avoided.
With double-hulled boat, you could make the shoot-thru-
hull installation only when some flotation materials (such
as plywood, balsa, wood or foam) are removed from the
Summary of Contents for NAKI8850B
Page 2: ......
Page 6: ...Specfications and Feature 49 Specfications 49 Features 50 Contact us 51 iv...
Page 58: ......
Page 59: ...www goyachting cn...