chosen area(see the following figure).
Warning:
Warning: contact your boat dealers to get the full specifi-
cations of your boat. And never try to remove any materials
from the inner hull before you completely know about the
composition of your hull.
Chose an appropriate position in the inner hull, then remov-
ing the inner layer of fiberglass and flotation materials,
thus the surface of outer hull exposed.
Epoxy the transducer to the outer layer of fiberglass; press
the transducer with a slight twisting motion to purge any
trapped air from underneath.
After the epoxy cures for 24hours and be certain that the
Inner hull
Resin
Flotation material Epoxy Outer hull
Summary of Contents for NAKI8850B
Page 2: ......
Page 6: ...Specfications and Feature 49 Specfications 49 Features 50 Contact us 51 iv...
Page 58: ......
Page 59: ...www goyachting cn...