17
P01.14
Before starting, end DC
braking voltage (%)
P01.15
DC braking time before
starting
P01.16
Direct starting initial
frequency (increasing
starting torque)
P01.17
Direct start initial frequency
holding time
P01.18
Instantaneous power down
frequency reduction point
P01.19
Decrease rate of
instantaneous power failure
frequency
P01.20
Restart idle time
P01.21
Restart voltage rise time
P02.00
Torque increase during
acceleration (%)
P02.01
Torque boost during
deceleration (%)
P02.02
Acceleration curve selection
P02.03
Deceleration curve selection
P02.04
Avoidance frequency 1
P02.05
Avoidance frequency 2
P02.06
Avoidance frequency 3
P02.07
Avoidance frequency width
P02.08
Window frequency1
P02.09
Window frequency2
P03.00
RS485 communication baud
rate
0
：
1200Bps
1
：
2400Bps
2
：
4800Bps
3
：
9600Bps
4
：
19200Bps
5
：
38400Bps(For higher baud rate, please
contact the manufacturer)
4
P03.01
RS485 communication
address
1-254
10
P03.02
RS485 communication
format (Modbus protocol.
Only supports RTU mode,
not ASCII mode)
0: 8-bit data, 1 stop bit, odd parity
1: 8-bit data, 1 stop bit, even parity
2: 8-bit data, 1 stop bit, no parity
3: 8-bit data, 2 stop bits, odd parity
4: 8-bit data, 2 stop bits, even parity
2
