-7-
BUZZER
When the buzzer is turned on, the printer will output an audible signal when a button is pressed.
Buzzer is turned on by default. To switch off the buzzer:
Select “OFF” and press [OK] to change the setting.
ENERGY SAVE
LED backlight of the LCM enhances the readibility of the content of the display. To save energy consumed, the backlight will go off after the printer idles for
3 minutes (shown as 03M on the display) by default.
To set a longer time interval:
Select an option, and press [OK] to change the setting.
Backlight will never go off.
Backlight will go off after the printer idles 3 minutes.
Backlight will go off after the printer idles 6 minutes.
LANGUAGE
You may switch the display language on the printer. The default language is English. To switch to other language:
Select a language and press [OK] to change the setting.
PRINTER NAME
You can change the printer name on the WiFi network with below steps:
RESTORE DEFAULT
All settings can be reset to factory default with a few clicks.
To reset all settings at once:
Simply select “YES” and press [OK] to reset.
Change the printer name
Press [OK] to read the instruction on inputing the printer name with the printer
control panel
4 input modes are available:
[A] : Capital English letters mode
[a] : Lowercase English letters mode
[1] : Arabic numerals mode
[@] : Special symbols mode
●
Home Key: Switch input mode
●
Up and Down keys: Select numerals, alphabets, or symbols.
●
Left and Right keys:Moves to the previous or next digit.
Up
Down
Right
HOME
Left
This is the name of the printer. Only 16 characters are allowed
Confirm the inputted printer name and press [OK] to finish.
Press [OK] to change the printer name.
