P9
1. Tap Filament Load and Unload on the
main screen.
1. Tap the icon when printing.
da Vinci Color will prompt you to refill material.
4. When the print head has been
warmed up to 220 °C, the feeding motor
will eject the filament.
2. Tap “Unload” and confirm the operation.
2. The screen will show filament status,
please tap "Refill" .
4. The nozzle will be preheated and the
filament will be unloaded automatically.
6. The nozzle will be preheat and notify you when to insert filament into the feed module.
7. The filament will be automatically loaded.
5. When the unloading operation
completes, tap to confirm.
3. Confirm the unloading operation.
3. Confirm the operation.
5. Replace the empty spool with a new one. (please refer to the LOADING section in this manual)
and then tap "PROCEED" .
Function Operation and Instructions
8. Check if filament is extruded from the nozzle, after confirmation, the printer will resume printing.
Unloading filaments
B2
Filament
Refill Material
B3
Filament
