Version 1.0
PartPro150 xP Operation Manual
13
INSTALLATION SUGGESTIONS
Installation Environments
Make sure the installation site follows below conditions:
Power requirements: AC 100~240V 50/60Hz 60W
Ambient temperature: 20-30°C (68-86°F)
Ambient humidity: 40-80% RH non-condensing
Optimal Placement
Follow below guidelines when positioning the printer:
Place the printer on a leveled and solid surface, or resin level detection may be inaccurate.
FEATURES
Resin Refilling
The printer refills the resin tank automatically before printing and when low tank level is detected. The auto-
refilling function eliminates the hassle of manual refilling and prevents incomplete prints due to material shortage.
Once the resin bottle is attached to the refilling system, the detecting system monitors the resin level
automatically.
Wiper
The wiper stirs the resin in the tank to ensure the evenness of resin temperature and color. The movement of the
wiper is noticeable once the printer is powered on, even when the system is idle. This ensures that the resin in
tank is ready for printing all the time.
Component
Description
A
Filling
faucet
Resin flows out from the filling
faucet to the tank when the
resin level is low.
B
Level
sensor
The level sensor detects the
resin level in the tank by
reading the positioning of the
floater.
C Floater
The floater floats on the
surface of the resin in the tank.
D Wiper
For stirring the resin in the
tank.
A
B
C
D
