SonTek, a Xylem brand
RiverSurveyor S5/M9 System Manual (February 2013)
137
Island Edge:
Select to insert an island in the measurement section
Figure 123. Station Dialog
Press the
Measure
button to begin collecting data,
Cancel
to go back to review the measured
station information, or
End Edge
to input the end edge location information. If you press Cancel
to go back, you must press Next Station (F5) in the upper left hand corner of the window to pro-
ceed with the measurement.
Once the station measurement is complete, a Measurement Results dialog (shown in Figure
124) will automatically display a summary of the measurement. Review this information and
then press
Accept
to proceed to the next station or
Repeat
to measure the same station again.
