13
Dissolved Oxygen Transmitter
GB Oxix Manual 1209
FW: 841013-009, 846001-002, 841513-009
2. Safety, Repair and Product Identification
Safety Instructions
• Read this manual carefully.
• Pay attention to the environment on the installation site.
• Wear necessary protective equipment and follow all current safety regula-
tions.
• Oxix
®
can invoke a start signal for dangerous machinery. Always ensure
that connected machinery and other equipment are effectively put out
of service (that is to remove the main fuses and lock main and security
switches in off-position) before commencing configuration, fault finding,
servicing, maintenance work, etc.
•
WARNING
: There is a risk of lethal, electrical shock from the "Mains sup-
ply" terminals "N" and "L". Be careful not to touch these terminals when
the Oxix
®
front cover is removed.
• WARNING:
Incorrect installation or use can lead to body injury and/or
material damage!
Physical Mounting
The Oxix
®
converter/display unit
must not
be mounted in explosion hazard-
ous areas!
Oxix
®
may only be installed and commissioned by authorized MJK personnel,
and all national and local regulations must be complied with.
Repair
Repair must only be made by authorized MJK personnel or by a service rep-
resentative approved by MJK.
Product Identification
A delivery will usually consist of an Oxix
®
sensor and an Oxix
®
converter with
or without a display unit.
Check that the item(s) delivered corresponds to the ordered item(s). The part
number is printed on an identification label stuck on the converter shipping
box and on a label on the converter itself.
