103
Dissolved Oxygen Transmitter
GB Oxix Manual 1209
FW: 841013-009, 846001-002, 841513-009
Zero Point Calibration
Zero point Calibration
0.00 mg/l
Oxygen 0.10 mg/l
Set actual measurement
Back Select OK
A zero point check or calibration is conducted as follows:
• The sensor is set for a zero point solution. The current measurement is
shown in line 2 (0.10mg/l in this example).
• Set the desired measuring value on the first line using the up and down
arrow keys.
• Save the current measurement setup by pressing OK.
The value is saved in the converter and will correct the measurement value of
the sensor.
See section
Guide to Oxygen-free Solution for Checking Oxix D.O. Sen-
sor Zero Point.
