6.6.2 Settings parameters
Parameter number
Parameter name
Description
P20
Password entering [0-999]
The user can enter here the
system password, which gives
access to all system parameters:
this value is compared with the
one stored in P22.
When a correct password is
entered, the system remains
unlocked for 10 minutes.
P21
Jog mode [MIN-MAX]
It deactivates the internal
controller of the unit and forces
the actual Control Mode (ACT):
the motor starts and the value of
P21 becomes the temporary ACT
setpoint. It can be changed by
just entering a new value on P21
without confirming it; otherwise, it
causes immediate exit from
temporary control.
P22
System password [1-999]
This is the system password, and
must be the same as the
password entered in P20.
Default: 66.
P23
Lock Function [OFF, ON]
By using this function, the user
can lock or unlock parameter
setting in the main menu.
When ON, enter the P20
password to change the
parameters.
Default: ON.
6 System Setup and Operation
Smart Pump Range INSTRUCTION MANUAL
33
Summary of Contents for GOULDS e-AB Series
Page 1: ...INSTRUCTION MANUAL IM326 Rev 2 Smart Pump Range Variable Speed Pump Unit...
Page 2: ......
Page 55: ......
