Xylem GOULDS e-AB Series, Instruction Manual

Page: 32 / 56

Parameter Description
Power on If after switching ON, parameter Menu View is accessed with P23 = ON,
P20 flashes: P20 → P20.
Enter the password to display and change the parameters.
Password timeout If with P23 = ON no button is pressed for over 10 minutes from the last
parameter Menu View, both the view and the editing of the parameters are
disabled.
Enter the password again to display and change the parameters.
Parameters Menu With P23 = OFF, or after entering the password (P20), it is possible to both
display and edit the parameters. When accessing the Parameter Menu, the
display shows:
P01 → P01
P02 → P02
...
P69 → P69
The flashing parameter, indicating the selection possibility.
Parameters Editing/
Visualization
The value of a parameter may be changed using the buttons, or the
Modbus and BACnet communication protocols.
When returning to the Parameter Menu, the displayed parameter index is
increased automatically. For further information see Par. 6.5.
• Example A (P20) from 000 to 066:
P20 → P20 → → 000 → 000 → … until … → 066 → 066 → sets
the desired value
→
P21 → P21
• Example 2 (P26) from 360 to 300:
P26 → P26 → → 360 → 360 → … until… → 300 → 300 → sets
the desired value →
→ P26 → P26.
6.5.3 Alarms and errors visualization
Parameter Description
Alarm In case of alarm, the corresponding code appears on the display in
alternation to the Main View.
For example:
A01 → 3.56 (ex. BAR)
A02 → 285 (ex. 10xRPM)
…
Error In case of error, the corresponding identification code appears on the
display.
For example:
E01
E02
…
6.6 Software parameters
Mark Parameter type
No mark Applicable to all units.
6 System Setup and Operation
30 Smart Pump Range INSTRUCTION MANUAL