2
FEATURES
• Self-Priming
• Dry Running
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
• Models Meet U.S.C.G. Electric Standards
SPECIFICATIONS
Motor:
Pump:
Permanent Magnet, Ball Bearing, O-Ring
sealed. CE Models are fully suppressed.
Four chamber positive displacement
diaphragm design; Self-priming up to 6 ft.
(2m) suction lift; Pump able to run dry without,
damage; Removable port to hose connectors.
PUMP
SERIES
DIMENSIONS - INCHES (MM)
WEIGHT
LB. (KG)
HEIGHT
WIDTH
LENGTH
X4105XXX
3.75 (95)
6.3 (160)
8.2 (208)
3.9 (1.8)
MODEL*
VOLTS
AMP DRAW @ 10 PSI (0.7 BAR)
FLOW GPM (LPM)
X4105143
12V DC
3.6
3.3 (12.5)
X4105343
24V DC
1.8
3.3 (12.5)
OPERATION
Your “Quad II” pump is designed to self-prime up to
6 ft. (2m) suction lift (vertical distance from shower
pan to pump inlet). This pump is quiet running. It is
recommended you utilize a “lighted” on-off switch so
that the pump is turned off when not in use the “Quad
II” is able to run dry (no liquid) for extended periods
with no damage to the pump. However, this could cause
needless battery drain.
EXPLOSION HAZARD:
Do not use
motor pump units for pumping gasoline
or other flammable liquids. Doing so may
result in explosion which could cause
personal injury, death or property damage.
WARNING:
DO NOT USE A PUMP IF
IT PRESENTS SOME DAMAGE SUCH AS
BURNED OR BROKEN PRESSURE SWITCH,
EXPOSED ELECTRIC WIRE AND/OR
CONTACTS.
Flojet Shower
Drain Pump
Flojet Inline
Strainer
INSTALLATION
STEP 1
Remove shipping plugs from Quad pump ports. Some
water from factory testing may spill out
STEP 2
Install inlet A and discharge, B port connectors. Firmly
push slide clips C forward to lock port connectors in place.
STEP 3
Slide rubber mounts fully into 4 mounting tracks.
STEP 4
Mount pump vertically, with pump head down or
horizontally in an able location. If mounting vertically,
motor up, attach motor mounts first then pump head
mounts, while supportingweight of pump.
*CE fully suppressed models are identified by a prefix “R” and a CE mark on the label. (i.e. R4105343). Self Declaration Of Conformance (SDOC) is available
upon request.
