Page 68
June 2022 – TD 320 OPERATING MANUAL – TURBIDITY SENSOR 4296
5.3.1 Smart Sensor Terminal mode
In Smart Sensor Terminal the sensor will output
StartupInfo
with
Product Number
,
Serial
Number
,
Mode
,
Protocol Version
and
Config Version
. It will also output a first measurement
immediately after power- up and then a new measurement every x seconds, where x is the interval
in second set by Interval(x).
5.3.2 AiCaP mode
In
AiCaP
mode the sensor will output
StartupInfo
with
Product Number
,
Serial Number
,
Mode
,
AiCaP Version, Protocol Version
and
Config Version
. In this mode the sensor will not output
any measurement since it needs an Aanderaa Datalogger as Master. The sensor can be
configured for
AiCaP
use via the Terminal software.
5.3.3 AADI Real-Time mode
AADI Real-Time
mode is also a Serial output but with xml instead of ASCII. This is the mode used
with
AADI Real-Time Collector
and also preferd by som integrators when sensor is connected to
3
rd
party loggers or interface.
Figure 5-1: Typical power-up output for sensor set to Smart Sensor Terminal mode
Figure 5-2: Typical power-up output for sensor set to AiCaP mode
Figure 5-3: Typical power-up output for sensor set to AADI Real-Time mode