Page 106
June 2022 – TD 320 OPERATING MANUAL – TURBIDITY SENSOR 4296
10.2.4 Remote cable 4793 for connecting sensor to SeaGuard/SeaGuardII
Remote cable 4793 is used when you want do mount the sensor away from the instrument top-
end plate. This is used if you want to measure gradients and one sensor is located on the top end
plate and the second sensor are mounted in the water column away from the instruments.
10.2.5 Patch cable 4999
Patch cable 4999 are used if sensor is mounted in position 6 on the top-end plate or if the
instrument is without a hub-card, then the patch cable are used to connect the sensor to the
instrument main board.
Figure 10-7: Remote sensor cable 4973
Figure 10-8: Patch cable 4999