Xyclop XC-4CH-NVR-1TB User Manual Download Page 115

Page: 115 / 144

User Manual of Xyclop NVR

115

10.1

Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc.

Steps:

Enter the OSD Configuration interface.

Menu > Camera > OSD

Select the camera to configure OSD settings.

Edit the Camera Name in the text field.

Configure the Display Name, Display Date and Display Week by clicking the checkbox.

Select the Date Format, Time Format and Display Mode.

Figure 10. 1

OSD Configuration Interface

You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position.

Click the

Apply

button to apply the settings.

Summary of Contents for XC-4CH-NVR-1TB

















































































































































Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands

Xyclop XC-4CH-NVR-1TB, User Manual

Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands