Xyclop XC-4CH-NVR-1TB User Manual Download Page 73

Page: 73 / 144

User Manual of Xyclop NVR

Click the

Export

button to enter the backup device management interface.

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

Figure 6. 11

Export by Event Using USB Flash Drive

Select the backup device from the drop-down list, click the button

Export

. And then select to export the

video and log files or the player to the backup device. Click

to confirm.

Figure 1. 1

Export Selection

Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.

Figure 6. 12

Export Finished

Summary of Contents for XC-4CH-NVR-1TB

















































































































































Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands

Xyclop XC-4CH-NVR-1TB, User Manual

Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands