Xyclop XC-4CH-NVR-1TB User Manual Download Page 125

Page: 125 / 144

User Manual of Xyclop NVR

125

11.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the configuration files of one

NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 11. 14

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the NVR.

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for XC-4CH-NVR-1TB

















































































































































Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands

Xyclop XC-4CH-NVR-1TB, User Manual

Search results

Summary of Contents for XC-4CH-NVR-1TB

Reviews:

Related manuals for XC-4CH-NVR-1TB

Brands by name

Popular brands