Web Configuration Interface
XVTEC
Page 23
Figure 4: Video Encoding Page (Native Encoding Selected)
3.5.2
Encoding Pipe
Encoding pipe selects the pre-processing algorithm applied to the video input.
Select
scaling
to support scale up or down the video input. The
Video Width
and Height
field becomes enabled.
Select
Native
to pass the video source directly to the encoder without scaling
it. The
Video Width and Height
fields becomes disabled (Refer to figure 4).
3.5.3
Encoder Bit Rate
Encoding bit rate sets the amounts of bits per second allocated for compression in
Kbs. For example, setting this field to 1000Kbps will produce approximately
1000K bit per second. The value selected depends on the application. For high
quality video streaming and complex scenes at a resolution of 720p30 it is
recommended to set the encoding bit rate to 4000-8000Kbps.
