Web Configuration Interface
XVTEC
Page 22
By default, the button is disabled, pressing it has no affect.
In order to configure the button:
a.
In the WEB interface select
Channel Settings
b.
From the pull down menu select
i.
Button disabled
– Button has no affect
ii.
Channel 1
– Button is enabled and effects only channel 1. Pressing the
button will initiate streaming based on the streaming protocol configured.
The Activity LED of channel 1 will blink indicating streaming is active
iii.
Both channels
– Button is enabled and effects both channels. Pressing the
button will initiate streaming on both channels based on the streaming
protocol configured. The Activity LEDS will blink indicating streaming is
active
To set video encoding parameters:
1.
From the XVC navigation tree, select the
channel
whose encoding you want
to set.
The
Channel Settings
page appears for that channel (Figure 4).
