4.4 MOTION DETECTION CONFIGURATION
Click to enter Motion Detection Configuration
page.
Definition of the setup items:
Sensitivity
Set motion detection sensitivity here.
Select all
Selects all of the area of the channel as the
detection area
Clear
Clears all the detection areas so you can
customise the detection area.
4.4.1 Set Motion Detection Area
If you want to customise a detection area for a certain channel, first select the camera from the
dropdown menu, then select ‘Clear’. Then drag the cursor on the camera image over the area you want
set to have motion detection. You can select a maximum of 16 areas for each channel. The set area(s)
will be bounded by a green box. Click ‘Clear’, to clear all the selected areas of motion detection.
4.4.2 Set Motion Detection Sensitivity
Within the green-boxed areas, set the value for Motion Detection Sensitivity. The higher the number the
higher the sensitivity of detection.
4.5 ALARM CONFIGURATION
Click to enter Alarm Configuration page.
4.5.1 Alarm Triggering Conditions
Configuration
The system can receive alarm both from local
device and network
1. LOCAL ALARM RECORD TRIGGERING
CONDITIONS CONFIGURATION
•
Buzzer
Users can select whether to turn on the
computer buzzer if an alarm gets triggered. Select value (seconds) from the dropdown menu.
• Full Screen Alarm
When an alarm is triggered (ie. when motion is detected), the corresponding camera channel
can be set to appear full screen to alert you. Select value (seconds) from the dropdown menu.
• Disk Shortage Alarm
If the HDD space available is less then the set value, the buzzer will beep if it has been enabled.
Select value (seconds) from the dropdown menu.
18
XUSB4DVR User Guide
Fig 4.6 Motion Detection Configuration
Fig 4.7 Local place alarm triggering conditions
