5
Version 1 – GBR (05/05/2020)
D-502-0173
1.3.2.
Prohibited use of the unit – MiracleAir unit must not be used:
-
f
or extracting burning or glowing substances!
-
to extract highly flammable or explosive gases.
-
for extracting aggressive media
-
for extracting liquids of any kind.
-
in an environment with an increased risk of explosion, flammable substances and increased dust load.
-
Neither the manufacturer nor the supplier is liable for damages caused by improper use of the units. The
risk is borne by the user.
1.4.
Transportation, delivery inspection and storage
1.4.1.
Transportation
-
Transport the product in the position marked with the symbol on the packaging.
-
The packaging must not be loaded in excess of limits permitted by the manufacturer.
-
The packaging must not be exposed to environmental effects
-
The transport temperature of the air must be between –25 and 55° C, for a short time (24h) up to 70° C.
-
The relative humidity during the transport must be between 10 and 90% (non-condensing).
-
Use adequate tools for transport to prevent damage to the product and damage to the health and
endangering persons.
-
During further transport without the original packaging or with altered original packaging, the device
must be optimally secured and protected against damage.
1.4.2.
Delivery inspection
-
Before the installation and before unpacking the unit from the box, it is necessary to check the packaging
for any signs of damage. In case of damage to the packaging, please contact your carrier.
-
Check that the delivery truly contains the product you ordered. After unpacking, check that the unit and
other components are not damaged. Report any discrepancy with the ordered products immediately to
the supplier. If the complaint is not made immediately after the delivery, it will not be taken into account
later.
1.4.3.
Storage
-
If you do not install the unit immediately after the purchase, it must be stored indoor, in non-condensing
environment at temperatures ranging from 0 to 40° C. If the product is transported at temperatures
below 0° C, it must be stored in the operating environment it is to be installed for at least 2 hours after
unpacking.
1.5.
Package contents
Box 1
-
MiracleAir unit
1x
-
Quick safety data sheet
1x
-
Production label
1x
Box 2 (only for units with a suction arm)
-
Suction arm 1 (fixed)
1x
-
Suction arm 2 (with flexible end)
1x
-
Mounting clip
2x
-
Self-tapping screw 4.2x9.5
2x
-
Protective sleeve
50x
1.6.
Before the installation
-
Before the installation, we recommend attaching the production label (supplied in the package) to the
operating documentation (e.g. equipment operation book, etc.) to be kept for later maintenance records
and possible service.
-
Before starting any installation work, make sure that the intended mains socket is equipped with a
protective contact (pin).
-
Verify that the outlet meets power requirements of the unit (voltage, current, etc.) listed on the
production plate of the unit.