3
2
Hardware Installation
Check the unit and the accessories after getting the device. Please don’t power up the unit till
the physical installation is complete.
2.1 Install Hard Drive & DVD Writer
2.1.1 Install Hard Drive
Notice
: 1. This series of product supports eight SATA hard drives (Some models may
support four SATA HDDs). Please use the hard drive the manufacturers recommend
specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please
refer to “Appendix B Calculate Recording Capacity”.
①
Open the cover and loosen the screws to take out the upper mounting bar, and then
install the HDD.
②
Connect the power and data cables and install the other three HDDs according to
above-mentioned method and install back the upper mounting bar.
③
Install the upper four HDDs and install back the cover.
Note: There may be only one mounting bar for some models. Thus, only four HDDs can be
installed under the mounting bar.
