12
4
Add IP Cameras
This chapter mainly introduces how to connect multiple IP cameras through NVR. Once you
finish adding IP cameras, you can see the live images through the monitor of the NVR. You
may connect the previous 16 CH directly to the device through PoE network ports and then
add the IP cameras for the remaining channels into the NVR via WAN/LAN. Here we will
introduce how to add cameras through WAN/LAN.
To add IP cameras via LAN
:
①
Please go to Main Menu
IP Camera tab. Refer to Fig 4-1. Click “Search” button to
search the devices in the same network. (The IPC which supports the Onvif protocol
may be added manually.)
Fig 4-1 Device Management
②
Go to the search tab. Click “Refresh” to refresh the searched devices. If the IPC is not in
the same local network, you can select the device and click “Setup” to modify the IP
address of the searched device. Refer to Fig 4-3.
Fig 4-2 Add Devices
