Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
19
MAINTENANCE
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the reed switch should be adjusted. To adjust
the reed switch, the run disc (48) must first be removed.
Remove the left pedal (19L) from the run disc (48). Remove the end cap for run disc (46) and
flange screw (47). Hold the run disc (48) and pull it apart slightly.
19L
46 47
48
Next, locate the sensor wire (84). Turn the pulley until the magnet is aligned with the reed
switch. Loosen, but do not remove, the ST5 x 15 screw (26). Slide the reed switch slightly
toward or away from the magnet. Make sure that the magnet will not hit the reed switch.
Retighten the screw (26). Turn the pulley for a moment. Repeat until the console displays
correct feedback.
26
78
84
When the reed switch is correctly adjusted, reattach the run disc.
