manualshive.com logo in svg

Xterra 16468451US, Owner'S Manual

Share
Download
Xterra 16468451US Owner'S Manual Download Page 21

Customer Service 1-888-707-1880 
or email [email protected]                                     Dyaco Canada Inc. ©2014 

20

HOW TO ADJUST THE DRIVE BELT 

If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to 
the highest level, the drive belt may need to be adjusted. To adjust the drive belt, the right chain 
cover (56R) must first be removed.   
 
Remove the right pedal (19R) from the run disc (48). 
Remove the two self-tapping screws (55) from each side of chain cover (56). Remove another 
seven ST5 x 15 self-tapping screws (26) from right chain cover (56R). Hold the chain cover (56) 
near the back and pull it apart slightly until the chain cover can be lifted off the ends of the run 
disc (48). 

Do not pull the chain cover apart at the top or the seam may be broken.

  

 

19R

55

55

26

26

26

26

26

26

56R

55

55

 

 
Next, turn the nut (71) on clockwise to tighten the eye bolt (70). 

70

71

 

When the belt is correctly adjusted, reattach the chain cover and the crank covers. 

 

Summary of Contents for 16468451US

































Reviews:

No comments

Brands by name

Popular brands

Load more brands