Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
9
Step 4
Thread the ball end cap (35) to the quick release handle (29). Note thread on clockwise.
Pull up the brake bracket (94) and the quick release handle (29).
Slide the seat support bracket (32) into the rear support tube (7). Secure by pressing down
the brake bracket (94) and quick release handle (35). Attach left sliding tube cover (23L) to
the left side of the seat support bracket (32). Secure using four self tapping screws (26)
which are pre-assembled on the left cover for sliding tube (23L) and three screws (28) which
are pre-assembled on the rear support tube (7).
Attach the right sliding tube cover (23R) to the right side of the seat support bracket (32).
Secure using three screws (28) which are pre-assembled on the rear support tube (7).
Attach the bottle holder (97) to the front post (4). Secure using two self tapping screws (55)
which are pre-assembled on the front post (4).
1
23R
28
23L
26
26
28
28
28
28
28
32
35
29
55
97
7
4
29
94
