a.
Set wall bracket mounting on the wall. Draw out center site of the hole on the wall against bracket
sample
b.
Use drill to make 4 holes with the M8 size at the designated site. Screw in M8 bolt for mounting
c.
Put power, communication and video lines through bracket hole, leaving enough wire
length Maneuverability.
d.
Fix the bracket to the wall with 4 M8 bolts and mounting tray.
·
Housing Installation
a.
Remove housing from the packing and put the cable into the bracket from bracket top. Install
G1 1/2 bolt on the top of housing into the bolt of wall bracket. At the same time, use two M8
bolt to secure in place.
Summary of Contents for SDOME4802201
Page 12: ......
