Safety Attention Notes
●
Please read the instructions thoroughly before installing or operating the unit.
●
Please do not put the machine on an unstable table or mounting bracket.
●
Please prevent all liquids or other contaminating material from entering into the dome
housing.
●
When connecting to the power source, please follow all electric safety standards and
only use the power supply designated for this device. The speed dome's RS-485 and
video signal uses TVS technology to protect it from strong electric surges. This
technology prevents damage to the device resulting from impulse signals such as
lightning strikes or surges under 500W power. Allow for enough distance between the
RS-485 and video signals and high-voltage equipment or cables during the
transmission process. Please do not power the unit until all connections are secure
and installation is complete.
●
Avoid shooting very bright objects directly into the camera's CCD (such as the sun or
light fittings).
●
When the machine is not operating properly, do not casually repair it. Refer to the
instructions for information about how to service or repair your speed dome.
●
Please protect the unit against extremes of vibration, pressure or dampness while
transporting unit. Damage can occur from improperly packaging the unit while
shipping.
●
Please only install the outdoor dome camera system in outdoor environments.
Summary of Contents for SDOME4802201
Page 12: ......
