- 50 -
Step 3: After few seconds , there are 2 beeps : short Beep + middle beep
Which means WPS connection successfully.
There are messages updated during the configuration in
“ WPS status “ section :
As WPS connection successfully , there is
“Configured “ message as following :
If user does not press the WPS function of selected AP ( WiFi Router )
SCAN AP
……
PCB: NO AP
(one Long Beep) No Used
Which means the WPS connection fail and there is one long beep mean the connection fail.
Please try again. )
Step: 4 : You can see the WPS connection in section
“ WiFi Info “ & “ WiFi Survey “ of Network
In
“ WiFi Survey “
