- 71 -
Step1:
Please connect IPM-401W to your PC directly
and change the IP address of your PC
as 192.168.1.xxx ( set the IP of your PC to be the same segment of IPM-401W . )
xxx can be 1~255 but not 168 .
Step 2 : After log in to the IPM-401W in LAN, please go to
Network
Setting
Default gateway setting to change the Gateway from
“ WiFi ” to “ LAN
“ and click “Apply” .
Step 3 : Connect your PC and IPM-401W to a router by LAN. Then
reboot IPM-401W (MUST
DO)
. After 45 seconds with a long beep, you can found the LAN IP of IPM-401W by IPEIDT.exe
Q6: How can I reset to default:
A6 : Please use tiny pin head and keep pressing the button
“RESET for 5 seconds at least and
release , there is a long beep sound after around 45 seconds . Then please power reboot the
IPM-401W . after around 45 seconds there is a middle beep sound then you can use IPEDIT to
hekc
which means system reboot successfully and set back to default.
Q7 : Why can`t I see the video of USB Webcam in IPM-401W webpage ?
A7 :
Please check the following premises :
Please make sure the setting of
“Capability “ is “Enable “
-
The USB WebCam support UPNP connection and support M-JPG or YUV format .
-
The web browser is IE 9.0 at lest or above .
-
The JAVA version is 1.60 or above
-
The gateway setting is correct - WAN or LAN to view on Internet
