- 37 -
B-4 As mouse move to the line chart , there is message board shows time, current and
consumed power current in a square as following:
Over Current Protection ( Max. Current limit )
There has over current protection in IPM-401W. As the Amp value of power A is over the setting or
over the maximum value 10 Amp, IPM-401W will automatically turn off that power A in few seconds
.
There is an alarm with beep sound and via e-mail advice as over current. The alarm can be
enable or disable for each power in Alarm setting of Power Control in IO Control section.
As the detected Amp value is over the current limit setting, IPM-401W will keep short 2 beep
for several times to remind the over loading issue happened and then turn off that output after
a long beeping .
