116
Refresh
Click this button to get device latest configuration.
7.6.4.4
Mobile Configuration
Please note only the unit of 3G module supports this function.
Mobile configuration interface is shown as in Figure 7-56.
Figure 7-56 Mobile Configuration
Please refer to the following sheet for detailed information.
Parameter
Function
Send event
message
Device can send the event message (alarm information, motion detection
and etc) to the mobile user. You can check the box to enable the function.
Receiver
You can input one or more mobile number(s) here to receive the
message.
SMS activate
The mobile user can send out message to activate the device to connect
to the 3G network.
You need to check the box to enable current function.
Please note the contents shall not be capitalized and there shall be
no blank.
Sender
You can input
several senders’ mobile number here.
Dial activate
The mobile user can give a call to activate the device to connect to the 3G
network.
You need to check the box to enable current function.
Please note the dial activate function is to control the connection.
You can not use this function to disconnect the wireless connection.
Caller
You can input
several senders’ mobile number here.
Add
Click it to add the corresponding mobile phone user.
Delete
Click it to remove the corresponding mobile phone user.
