108
Important
The alarm output port should not be connected to high power load directly (It shall be less than
1A) to avoid high current which may result in relay damage. Please use the co contactor to
realize the connection between the alarm output port and the load.
Please refer to the following sheet for detailed information.
Parameter
Function
Alarm output
There are two output channels (Multiple choices).
Activate
Enable/disable alarm output device. After the Web activated the
alarm, you need to cancel the channel and then click the
activation button to cancel the alarm, or you need to cancel the
alarm in the pop-up dialogue box in local-end.
Refresh
Search alarm output status.
7.6.3.3 Record
Record control interface is shown as in
X474H474H474H4 44H444H 444H451H 414H
Figure 7-46
X
.
Figure 7-46
Please refer to the following sheet for detailed information.
Parameter
Function
Auto
System enables auto record function as you set in record schedule
setup.
Manual
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop
Stop current channel record no matter what period applied in the
record setup.
Operation here is the same to chapter 4.2 Manual Record. Please refer to chapter 4.2 for
detailed information.
7.6.3.4 Account
Here you can add, remove user or modify password. See
X475H475H475H445H 445H445H 452H415H
Figure 7-47
X
.
