XtendLan DVR-411AUTO, User Manual

Page: 55 / 139

46
4.9.4 Activate Patrol (tour)
Figure 4-37
In
X341H341H 341H311H 311H311H 318H
Figure 4-34
X
, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In
X342H342H 342H312H 312H312H 319H
Figure 4-34, click pattern button and then click
“begin” button. The interface is shown as
in
X343H343H34 3H313H31 3H313H32 0H
Figure 4-38. Then you can go to
X344H344H344H314H 314H314H 321H
Figure 4-33
X
to modify zoom, focus, and iris.
Go back to
X345H345H345H31 5H315H31 5H322H
Figure 4-38
X
and click
“end” button. You can memorize all these operations
as pattern 1.
4.9.6 Activate Pattern Function
Figure 4-38
In
X346H346H 346H316H 316H316H 323H
Figure 4-35, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
X347H347H 347H317H 317H317H 324H
Figure 4-34, click border button. The interface is shown as in
X348H348H348H318H31 8H318H32 5H
Figure 4-
39. Please go to
X349H349H349H 319H319H 319H326H
Figure 4-31
X
, use direction arrows to select camera left limit
Then please go to
X350H350H350H 320H320H 320H32 7H
Figure 4-39
X
and click left limit
button Repeat the above procedures to set right limit.
Figure 4-39